Rubber Mouldings
Various
services are available to your own specifications.
HoneyCrown's rubber moulding service
Honeycrown's
moulding service can offer you short or long runs on even the most demanding of
molded applications. Either send us your drawing or sample and we will do the rest.
moulding can be carried out in a number of ways such as:
- injection moulding
- compression moulding
- transfer moulding
Compression moulding
Rubber is pressed between 2 halves of a mould that have been heated. This is generally
done with vertical presses. After it is formed, the part is cured at various temperatures
for set times.
transfer moulding
The preformed stock flows from a transfer pot to the cavities.
injection moulding
Soft heated rubber is forced into a heated mold under a very high pressure. Once
the product is cured, the mold is unclamped and the finished part is then removed.
Seal Design considerations
It is critical to the success of any sealing application to consider a number of
inter-dependant variables if the required end product performance is to be achieved.
1. The medium to be selected and its chemistry
2. Pressure range and frequency of application
3. Clearance between mating components
4. Degree of lubrication present
5. Frequency and speed of relative motion
6. Surface finish on adjacent components
7. Method of handling and installation immediately prior to assembly
Whatever your moulding requirements are, Honeycrown Limited
has the expertise and facilities to provide you with the solution you need. For
further information, contact Honeycrown on +44 (0)1978 853730, email us at
sales@honeycrown.co.uk or use our
contact page, and we will provide you with the support you require.
You can send your designs to us on our contact page.
©Rubber mouldings manufacturer Honeycrown Limited